SunModo’s innovative solar racking systems can be used for residential, commercial, and utility-scale PV projects.
Here are two main racking categories are roof mount and ground mount.
- Roof-Top installation – most cases for residential houses
- Pros: Easy to install with less cost.
- Cons: Besides the space, the other limitations are roof direction, and shading from surroundings.
- Based on different roof materials:
- For the composite roof, we use SunModo’s Nano Mount System and Solo Flash System.
- For the metal roof, there are non-penetration SunDock system, and other easy-to-install Metal Roof Mount solutions.
- For the tile roof, SunModo’s innovative TopTile Mount is the world’s first PV mounting system that is mounted entirely above the tiles.
- Based on different roof styles:
- For the flat roof, we use SunModo’s SunTurf System and SMR Tilt-Up System etc.
- For pitched roof, the SMT Pitched Roof System can meet different project requirements.
- Ground installation
- Pros: Easy to do layout, can support higher tilt angles, can use as a shelter, etc..
- Cons: Could cost more with a ballast systems if the ground is not good for posts.
- See SunModo’s SunTurf System
There are also some other special solutions, e.g. Awning System, Carport System, etc., which can provide you additional functionalities.
SMR Pitched Roof System
- The best value, best performing rail system on the market
- Lag-to-Panel single tool installation
- Pop-On universal clamps make installation fast, reliable and flexible
- A full range of roof attachments to meet every need
- Fastest install and lowest cost
NanoMount System
- The fastest roof attachment in solar
- 5 levels of protection against water penetration
- Eliminates the need to lift shingles and prevents damage to shingle
- Versatile mounting options including direct-to-decking
- High-Velocity Hurricane Zone Approved – Passed TAS 100 (a) Wind-Driven Rain Test
- All materials are compatible with asphalt shingles and single-ply roof membranes
SoloFlash System
- Quick to install with only three components
- 6 levels of protection against water penetration
- Exceptional resistance to corrosion and wear
- One tool assembly
TopTile System
- Mounting stanchion can be mounted on a tile ridge independent of rafter position.
- Hand bendable flashing and EPDM rubber boot for easy fit and superior leak protection.
- Works with 90% of the tile roof types.
- High-Velocity Hurricane Zone Approved – Passed TAS 100 (a) Wind-Driven Rain Test.
- Cut down installation time by 50%!
Metal Roof Solar Mount
- Options for practically any metal roof
- Simple, fast anchoring into wood trusses or metal purlins
- Leak-avoiding design fastens or ridge peak or valley
- Brackets engineered for easy adjustment and dispersed load
- Durable all-aluminum finish to resist corrosion
- High-Velocity Hurricane Zone Approved – Passed TAS 100 (a) Wind-Driven Rain Test
SMR Tilt Up System
- Ideal for light roof structure or older building applications
- No seismic or skid issues
- Low point load system = Low weight per square foot
- Various tilt angles for maximum flexibility
- Easy to install with minimal components
- Extruded channel in tilt-up rail provides module leveling for uneven roof
SunTurf Roof Mount System
- Span over rooftop obstacles such as HVAC, pipes and vents to maximize roof space and system size
- Convenient access to roof surfaces for maintenance and repair
- Components optimized for strength, durability and fast installation
- Canopy configuration available
- UL 2703 Listed by Intertek
SunTurf Ground Mount System
- Can be used as Roof Mount or Ground Mount.
- The streamlined design combines the simplicity of a pipe-based system with next-level engineering.
- Is ideal for a low cost high performance system that can accommodate a wide variety of soil conditions.
- Can easily integrate Helio Rails with Schedule 40 Steel Pipes.
- The innovative swivel pipe cap kit can accommodate terrains up to 27% slope east-west and 120% slope north-south.
- Combine SunTurf with the Ground Screws or Augers and do a complete install of a 15kW system with only one day on the job site.
